NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual
To configure WEP data encryption:
Note: If you use a wireless computer to configure WEP settings, you will be disconnected
when you click Apply. You must then either configure your wireless adapter to
match the wireless router WEP settings or access the wireless router from a wired
computer to make any further changes. Not all wireless adapter configuration
utilities support passphrase key generation.
1. Select Wireless Settings under Setup in the main menu.
2. In the Security Options area, select WEP. The WEP options display.
Figure 2-3
3. Select the authentication type and encryption strength.
Safeguarding Your Network
v1.0, February 2008
2-9