Factory Default; Restoring Factory Default Settings - Asus WL-300G User Manual

802.11g access point

Hide thumbs Also See for WL-300G:

Table of Contents

System Setup

Click this item on the menu to reveal a sub menu. Follow the

instructions to setup the ASUS 802.11g AP. Tips are given

when you move your cursor over each item.

Factory Default

Web Manager

You can reset all settings to their factory defaults through the web manager

using the "Factory Default" page in "Advanced Setup". Click the Restore

button and wait about 30 seconds before trying to access the ASUS 802.11g

AP.

Hardware

You can reset all settings to their factory defaults manually by pushing the

"Restore" button in a hole on the back of the ASUS 802.11g AP while it is

ON. Use a pen or straightened paper clip to hold the "Restore" button

depressed over 5 seconds until the power LED on the front of the ASUS

802.11g AP starts blinking.

Note: You will be notified when factory default settings are restored

while using the web manager.

Chapter 3 - Software Configuration

ASUS 802.11g Access Point

Table of Contents