Table of Contents
Advertisement
ASUS 802.11g AP Status Indicators
There are three LEDs on the front of the ASUS 802.11g WLAN AP, as
shown here.
Power LED
OFF:
No power or performing boot sequence
ON:
System ready
Blinking:
Firmware upgrade failed
Air LED
OFF:
No power
ON:
Wireless function ready
Blinking:
Transmitting or receiving data (wireless)
Link LED
OFF:
No power
ON:
Has physical connection to an Ethernet network
Blinking:
Transmitting or receiving data (through Ethernet wire)
Power Requirements
The ASUS 802.11g AP requires power from an external power supply. The
ASUS 802.11g AP ships with a UL listed, Class 2 power supply (5V, 1A).
Chapter 1 - Introduction
ASUS 802.11g Access Point
Power (Amber)
Air (Green)
Link (Green)
13
Advertisement
Table of Contents
