Ip Config; Lan; Get Ip Automatically; Yes - Asus WL-300G User Manual

802.11g access point
Hide thumbs Also See for WL-300G:
Table of Contents

Advertisement

Chapter 3 - Software Configuration

IP Config

Click this item on the menu to reveal a sub menu. Follow the
instructions to setup the ASUS 802.11g AP. Tips are given
when you move your cursor over each item.

LAN

Get IP Automatically

Select Yes (default) or No to get IP address automatically from a DHCP
server.

Yes

This parameter determines if the ASUS 802.11g AP will send out a DHCP
request during bootup. If you have a DHCP server on the network, set this
option so that the ASUS 802.11g AP can receive an automatic IP address
assignment.
If you have a DHCP (Dynamic Host Configuration Protocol) server on the
network, then the DHCP server will automatically assign the ASUS 802.11g AP
an IP address when the ASUS 802.11g AP is powered up. To determine what IP
address has been assigned to the ASUS 802.11g AP, review the IP address on the
"Status" page available on the "Main Menu".
No
The ASUS 802.11g AP also accepts a static IP address. You may manually
configure the IP address and subnet mask on the "IP Config" page. Enter
an IP address and a subnet mask in the field provided to assign the ASUS
802.11g AP a static IP address. If you don't know your Gateway setting,
leave it empty (not 0.0.0.0).
36
Selection items:
Yes (no info required)
No (need to input information)
Click Apply or Finish if you make
any changes.
ASUS 802.11g Access Point

Advertisement

Table of Contents
loading

Table of Contents