Table of Contents
Advertisement
4. Attach one end of the AC power adapter, included in the product package,
to the back of the ASUS 802.11g AP and the other end to a power outlet.
Note: Use the Access Point only with the power adapter supplied in
the product package. Using another power supply may damage the
Access Point.
The Power LED on the front of the Access Point will light up when the unit
is powered ON. In addition, the green Link LED will turn ON to indicate
that the Access Point has a physical Ethernet network connection.
Wall Mounting Option
Out of the box, the ASUS 802.11g AP is designed to sit on a raised flat
surface like a file cabinet or book shelf. The unit may also be converted for
mounting to a wall or ceiling.
Follow these steps to mount the Access Point to a wall:
1. Remove the base by pressing the tab and sliding the base.
2. Remove the side cover to expose the mounting hooks.
3. Locate the screws provided with the Access Point.
4. Mark two holes in a flat surface using the provided hole template.
5. Tighten the two provided screws until only 1/4" is showing.
6. Latch the Access Point onto the two screws.
Note: Readjust the screws if you cannot latch the Access Point onto
the screws or if it is too loose.
Chapter 2 - Hardware Installation
ASUS 802.11g Access Point
15
Advertisement
Table of Contents
