Device Info - Cradlepoint CBA750 Series User Manual

CBA750 | USER MANUAL Firmware ver. 1.9.0
CRADLEPOINT

7.1 Device Info

The Device Information sub-menu displays your Router settings. Options cannot be changed from this sub-menu. They
can only be monitored.
NOTE: Some browsers have limitations that make it impossible to update the WAN status display when the status
changes. Some browsers require that you refresh the display to obtain updated status. Some browsers report an error
condition when trying to obtain WAN status.
7.1.1 General
Time. Displays the time and date that the router is set to.
Firmware Version. Displays the currently loaded firmware
version.
WAN (Primary and Secondary Interface(s))
7.1.2
The information displayed will be for the currently active
WAN connection. To change the failover priorities of the
various WAN connections or to manually connect or
disconnect a WAN connection go to the Modem →
Failover sub-menu. If the connection is DHCP, clicking the
DHCP Release button unassigns the router‟s IP address.
The router will not respond to IP messages from the WAN
side until you click the DHCP Renew button or power-up
the router again. Clicking the DHCP Renew button
requests a new IP address from the ISP‟s server.
If the connection is via a modem, clicking the Disconnect
button will cause the modem to hang up, and it will not dial
again (regardless of the Reconnect Mode from the Global
Settings section of the Modem Settings page) unless you
re-plug it or click the Connect button.
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 65