Cradlepoint CBA750 Series User Manual page 25

CBA750 | USER MANUAL Firmware ver. 1.9.0
CRADLEPOINT
 Broadcast only. This setting is useful where there are no WINS servers available, however, it is preferred you
try Mixed-Mode operation first.
 Point-to-Point Mode. This setting indicates to use WINS servers ONLY. This setting is useful to force all
NetBIOS operation to the configured WINS servers. You must have configured at least the primary WINS server
IP to point to a working WINS server.
 Mixed-Mode (default). First broadcast operation is performed to register hosts and discover other hosts, if
broadcast operation fails, WINS servers are tried, if any. This mode favors broadcast operation which may be
preferred if WINS servers are reachable by a slow network link and the majority of network services such as
servers and printers are local to the LAN.
 Hybrid-State. First WINS servers are tried, if any, followed by local network broadcast. This is generally the
preferred mode if you have configured WINS servers.
Primary WINS IP Address. Configure the IP address of the preferred WINS server. WINS Servers store information
regarding network hosts, allowing hosts to „register‟ themselves as well as discover other available hosts, e.g. for use in
"Network Neighborhood." This setting has no effect if the Learn NetBIOS information from WAN is activated.
Secondary WINS IP Address. Configure the IP address of the backup WINS server, if any. This setting has no effect if
the Learn NetBIOS information from WAN is activated.
4.3.2 Number of Dynamic DHCP Clients.
This section displays what devices are currently leasing IP
addresses. The DHCP Client table displays the number of
clients that are receiving an IP address from the router, the
computer name, MAC address, and IP address assigned to
each computer. You can use the Revoke IP address option to take away a leased IP address from a client. This feature
is useful for freeing up addresses when the client table is full or nearly full.
4.3.3 Add DHCP Reservation
Clients configured as DHCP can receive the same IP address
all the time using this feature. This is almost the same as if a
device has a static IP address except that it must still actually
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 23