Cradlepoint CBA750 Series User Manual page 31

CBA750 | USER MANUAL Firmware ver. 1.9.0
CRADLEPOINT
when the router obtains a different DNS server address from the ISP upon re-establishing the WAN connection. You
should disable DNS relay if you implement a LAN-
side DNS server as a virtual server.
RIP (Router Information Protocol).
4.4.2
RIP is used to broadcast routing information among
routers.
Enable RIP. Enable RIP if required by the ISP, if the
LAN has multiple routers, or if the LAN has auto-IP
devices. NOTE: When you select the Enable RIP
check box, these additional features appear:
RIP Operating Mode. The CBA750 router supports
both version 2 and version 1 of the RIP
specification.
 V1. Use if none of the routers supports Version 2.
 V2 Broadcast. Use if some routers are capable of Version 2, but some are only capable of Version 1.
 V2 Multicast. Use if this is the only router on the LAN or if all the routers support Version 2.
Router Metric. The additional cost of routing a packet through this router. The normal value for a simple network is 1.
This metric is added to routes learned from other routers; it is not added to static or system routes.
Act as Default Router. Make this router the preferred destination for packets that are not otherwise destined.
Accept WAN Updates. For security, disable this option unless required by the ISP.
RIP Password. RIP Version 2 supports the use of a password to limit access to routers through the RIP protocol. If the
ISP or other LAN router requires a RIP password, enter the password here.
© 2012 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 29