Table of Contents
Advertisement
2. Make sure that you have all of the parts of the rack installation kit that are
needed to install the BladeCenter S chassis in a rack. If any parts are missing
or damaged, contact your place of purchase.
Cable strap
(6)
Rail
(2)
Upper Right shipping bracket
Upper Left shipping bracket
Rear of rail
Cable ties
(6)
M6 screws
(14)
M5 screws
(4)
Clip nut
(6)
Front of rail
Cage nut
(6)
Note: Left and right shipping brackets are required only when the
BladeCenter S chassis is shipped while it is installed in a rack cabinet. An
initial set of shipping brackets is provided in the rack installation kit. If you
need to order additional shipping brackets, you must order the miscellaneous
parts kit.
See the IBM BladeCenter S Type 8886 Problem Determination and Service Guide for
the Miscellaneous parts kit part number.
33
Chapter 2. Installing the BladeCenter S Types 7779 and 8886
Advertisement
Table of Contents
