Panasonic WJ-HD716/1000 Operating Instructions Manual page 84

Brightness
The brightness (lens aperture) can be adjusted by
clicking the [–] (darker) button or the [+] (brighter) but-
ton.
It is possible to reset the adjusted brightness by click-
ing the [Reset] button.
Preset
It is possible to register preset positions of the cam-
era and to move the camera direction to the regis-
tered preset positions.
Select the preset position number from the following.
Home, 1 - 256
When the [Move] button is clicked, the camera direc-
tion will move to the preset position corresponding to
the selected preset position number. When the
[Register] button is clicked, the camera direction will
be registered and assigned to the selected preset
position number.
Note:
• It is impossible to register the position as "Home".
• Only users whose user level is allowed to register
preset positions can register preset positions.
• Refer to the operating instructions of the camera
for the available preset position numbers.
Auto mode
Select the auto mode from the following. Click the
[Start] button to start the selected auto mode func-
tion. Click the [Stop] button to stop the auto mode
function.
Auto track: The camera will automatically track an
object moving on the screen.
Auto pan: The camera direction will automatically
move (pan) between the start point and end point
set in advance.
Preset sequence: The camera will move (pan) to the
preset positions registered in advance in order of
the preset position number (numerical order).
Sort: The camera will move (pan) counterclockwise to
the preset positions registered in advance in order
of the closest from the current position.
Patrol 1 - 4: The camera will trace the manually
recorded panning pattern.
84
Note:
• Each function of the auto mode is available only
for combination cameras. Refer to the operating
instructions of the camera for further information
about the auto mode function of the camera.
[Menu] box
When the [OPEN] button is clicked, the setup window
of the camera will be displayed. Refer to page 118 for
how to operate the setup window.