Panasonic WJ-HD716/1000 Operating Instructions Manual page 55

Step 7
Move the cursor onto the [B] (play) button, and then
press the [SET] button. (Or press the [PLAY] button on
the front panel.)
→ Playback of the selected recorded data (in which
motion was detected) will be displayed.
Note:
• When selected time and date is too close to the
current time and date, playback may sometimes
not start. In this case, wait for a while and try to
play again.
Step 8
To stop the playback, press the [STOP] button on the
front panel.
→ Playback will stop. Playback on monitor 2 will be
switched to live image display.
Note:
• When starting playback from the displayed VMD
search list, only recorded images of the listed data
are subject to play.
To make all recorded images available to play,
stop playback and start playback again.
55