Panasonic WJ-HD716/1000 Operating Instructions Manual page 39

Operation using the buttons on the front panel
Step 2
To stop the playback, press the [STOP] button.
→ The [PLAY/PAUSE] button will go off and playback
will stop. Playback on monitor 2 will be switched
to live image display.
Operations using a mouse
Step 3
Click the [Play] button.
→ Playback will start.
The playback start point varies depending on how
many times playback is performed after the login as
follows.
• The first playback after logging in to the
recorder
The latest recorded image will be played. The
playback start point can be set on the setup menu
("Latest image position" on the "Basic" tab under
"Basic") (☞ Installation Guide). "30 seconds
before the latest" is selected at the default.
• Other than above (The second and subsequent
playback after logging in to the recorder.)
Playback will start from the point at which the last
playback was stopped (time and date).
Step 4
To stop playback, press the [Stop] button.
→ Playback will stop.
Playback on monitor 2 will be switched to live
image display.
39