Status Display Area - Panasonic WJ-HD716/1000 Operating Instructions Manual

Status display area

q The status of image (live image/recorded
image) display operation will be displayed.
: Indicates that live images are being dis-
played.
: Indicates that playback images are being
displayed.
: Indicates that reverse playback images are
being displayed.
: Indicates that fast playback images are
being displayed.
: Indicates that fast reverse playback images
are being displayed.
: Indicates that a paused image is being dis-
played.
: Indicates that recorded images/audio are
being downloaded.
: Indicates that downloading of recorded
images/audio is completed.
[Step 1] - [Step 7]
: Indicates the playback speed.
: Normal playback speed (1x)
: Approx. 2x playback speed
: Approx. 5x playback speed
: Approx. 10x playback speed
: Approx. 20x playback speed
: Approx. 50x playback speed
: Approx. 100x playback speed
: Indicates that the sequence display is being
performed.
: Indicates the normal recording area or the
event recording area on the hard disk drive.
: Indicates that the DVD drive is being select-
ed.
: Indicates that the SDHC/SD memory card is
being selected.
: Indicates that RAID recovery is being per-
formed.
: Indicates that a recording events are being
filtered. Refer to page 93 for further informa-
tion about filtering of recording events.
q w
w [REC] indicator
e Indicates the following statuses:
r Indicates information about events and errors.
Note:
• The emergency recording will not stop by clicking
e r
Indicates the status of recording.
: Indicates that recording is being performed.
: Indicates that recording is not being per-
formed.
: Indicates that the camera is inoperable since
a user with a higher priority is currently operat-
ing the camera.
: Indicates that copying is being performed.
: Indicates that recorded images are being
deleted.
[ALARM SUSPEND] button
: Clicking this button will disable the subse-
quent alarm actions (☞ page 102).
: Indicates that the alarm is being suspend-
ed.
[ALM] button
: This button will be displayed when an event
occurs. The alarm action will be canceled by
clicking this button (☞ page 102).
[ERR] button
: Indicates an error occurrence. The error action
will be canceled by clicking this button. Refer
to pages 18 - 19 for further information about
errors.
the [ALM] button when the emergency recording
is being performed. It will stop only when
"Continue" is selected for "Recording duration" on
the "Emergency rec." page.
81