Clarion UNGO MS8200 Installation Manual page 25

When the minimum or maximum sensitivity levels have been reached, the siren will
emit 4 quick chirps.
5. Once you are satisfied with the Interior zone sensitivity setting, press the Mode Button,
then Button 2 to begin adjusting the Exterior zone.
• The siren will chirp 4 times, the Exterior zone can be adjusted.
6. Test the Exterior zone sensitivity.
• Each time the sensor detects movement, the siren will chirp 2 times and the LED on
the sensor will light green.
7. To make adjustments:
Press Button 1 to increase the sensitivity.
Press Button 2 to decrease the sensitivity.
• The siren will emit one long chirp when the sensitivity is increased and two long
chirps when the sensitivity is decreased .
When the minimum or maximum sensitivity levels have been reached, the siren will
emit 4 quick chirps.
You may return to Interior zone adjustment at any time by pressing the Mode Button.
then Button 1.
• The siren will chirp 3 times to indicate the Interior zone can be adjusted.
8. Once you are satisfied with the sensitivity, turn the ignition key off.
MS8200 / MS8300 Installation Manual - Page 23