Table of Contents
Advertisement
Indication for DVD/Video CD Player
(Monitor display)
• Mechanism error.
1) Press
and eject the disc.
If the disc does not eject, press
and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
a few times, consult your Alpine dealer.
(Monitor display)
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, "NO DISC" is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following step:
Press
again for at least 2 seconds.
(Monitor display)
• Remote control operation is not possible.
- For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
(Monitor display)
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
(Audio display)
again for at least 2 seconds
(Audio display)
(Audio display)
(Monitor display)
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and then
turn the power ON again.
(Monitor display)
• Mechanism error.
1) Press
and eject the disc.
If the disc does not eject, press
and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
a few times, consult your Alpine dealer.
(Audio display)
(Audio display)
again for at least 2 seconds
59
-EN
Advertisement
Table of Contents
