Table of Contents
Advertisement
Searching Directly by Chapter or Track
Number
Use this function to easily move to the beginning of the chapters or
tracks on the disc.
• This operation is performed by the remote control unit.
1
During playback, pre-stop or pause, input the
chapter or track number you want using the
numeric keypad ("0" to "9").
2
Press ENT.
Playback starts from the selected chapter or track.
• This function cannot be used on discs on which no chapter numbers
are recorded.
• During stop, search can be made for Video CD.
• The beginning of a track number cannot be directly found on the
Video CD equipped with PBC (playback control). Set VCD PLAY
MODE to turn the PBC function off. Refer to "Setting the Video CD
Play Mode" (page 35).
• Depending on the number of digits input, playback may start
automatically even if ENT. is not pressed in step 2.
• Press CLR to delete the last digit in the chapter/track number. Press
and hold CLR for at least 2 seconds to cancel the input mode.
Repeat Playback
Use this function to play the disc's titles, chapters, tracks, etc.,
repeatedly.
During playback, press
The repeat mode switches each time the button is pressed.
DVD Audio (VCAP mode)*
The track is played repeatedly.
The group is played repeatedly.
The mode returns to normal playback.
(Factory default)
DVD Audio (VOFF mode)*
The track is played repeatedly.
The group is played repeatedly.
The entire disc is played repeatedly.
(Factory default)
22
-EN
4 on the main unit.
1
1
DVD Video
The chapter is played repeatedly.
The title is played repeatedly.
The mode returns to normal
playback. (Factory default)
DVD-VR (while playing back programme)
The chapter is played repeatedly.
The programme is played repeatedly.
All programmes are played repeatedly.
(Factory default)
DVD-VR (while playing back Playlist)
The chapter is played repeatedly.
The playlist is played repeatedly.
The mode returns to normal
playback. (Factory default)
VIDEO CD
The track is played repeatedly.
The entire disc is played repeatedly
(Factory default)
Playback does not repeat.
1
*
Set "VCAP" or "VOFF" in Custom Setup. For detail, refer to
"Setting the DVD Audio Playback Mode" (page 35).
2
*
Displayed only in the changer mode.
• The track/disc repeat modes cannot be used on video CDs with
playback control (PBC). Set VCD PLAY MODE to turn the PBC
function off. Refer to "Setting the Video CD Play Mode" (page 35).
• For some discs it is not possible to switch the repeat mode.
• During DVD Video playback, pressing and holding
2 seconds will change the unit to REPEAT OFF.
4 for at least
Advertisement
Table of Contents
