Table of Contents
Advertisement
• When the Scroll Setting (page 29) is set to "SCROLL MANU," press
and hold TITLE for at least 2 seconds to scroll the Text information
only once (TEXT DISPLAY, FOLDER NAME DISPLAY, FILE NAME
DISPLAY or TAG DISPLAY mode).
• "NO SUPPORT" is displayed when the desired text information
cannot be displayed on this unit.
• The text or tag information may not be correctly displayed,
depending on the contents.
Displaying Time
Press TITLE repeatedly until the time is displayed.
Each press changes the display.
For details, see "Displaying the Text" (page 27).
• Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
• When the power is off but the ignition key is on, press TITLE to
display the time.
Blackout Mode On and Off
When Blackout mode is turned on, the display and button illumination
will turn off to reduce power consumption. This additional power
enhances the sound quality.
Press and hold FUNC. for at least 2 seconds to activate
the blackout mode.
The display and button illumination will turn off.
• If any button on the unit is pressed during the blackout mode, the
function will be displayed for 5 seconds to show the operation before
returning to Blackout mode.
To cancel Blackout mode, press and hold FUNC. for at least 2
seconds
Setting the Wallpaper
A data file downloaded from the ALPINE Owner's website is written to
a CD-R/CD-RW disc, and automatically uploaded when the disc is
inserted into the DVA-9861Ri.
The wallpaper file can be saved and displayed as long as a disc is not
inserted, or while playing a CD/MP3/WMA audio, or if a DVD disc is
stopped.
• If several files are stored in a disc, only the first file will be stored on
the unit.
Insert a CD-R/CD-RW disc containing data.
After sensing the disc, the data file is updated.
• Up to 2 files can be stored on this unit. If a third file is downloaded,
the first file is overwritten and new one memorized.
• To change the wallpaper, press and hold ENT. on the remote control
unit for at least 2 seconds while disc is not inserted, or while PRE-
STOP or STOP is set in disc mode.
• Even if the battery power cable is removed, the downloaded data is
not cleared.
28
-EN
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from Sound Customizing, Visual
Customizing, etc., to select your desired setting.
Rotary
SOURCE/
BAND
encoder
POWER
MODE
A typical SETUP procedure is shown in steps 1 to 4 as
follows. See below for further information about each
SETUP menu.
1
Press MENU to select the SETUP mode, then press
MODE.
BASS ENGINE
SETUP
SETUP mode is activated.
2
Press
or
to select the desired SETUP
menu, then press MODE.
(e.g. Select SUBWOOFER)
FM LEVEL
RDS REGIONAL*
3
PTY31*
AUTO CLOCK*
SUBWOOFER
(SUBW SYSTEM)*
SCROLL TYPE
TEXT SCROLL
6
(AUX NAME)*
POWER IC
FM LEVEL
1
*
Refer to "Receiving RDS Regional (Local) Stations" (page 11).
2
*
Refer to "PI SEEK Setting" (page 12).
3
*
Refer to "Setting PTY31 (Emergency Broadcast) reception"
(page 12).
4
*
Refer to "Setting the Time to automatically Adjust" (page 12).
5
*
Displayed only when SUBW is ON.
6
*
Displayed only when AUX is ON.
3
Turn the Rotary encoder to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
MENU
RETURN (OFF)
BASS ENGINE
1
2
PI SEEK*
ALERT
4
ILLUMINATION
DIMMER
5
PLAY MODE
INT MUTE
AUX IN
OPT OUTPUT
DEMO
Advertisement
Table of Contents
