Configuring Proxy Settings For Mcafee Labs Security Threats; Using Superagents As Distributed Repositories - McAfee EPOCDE-AA-BA - ePolicy Orchestrator - PC Product Manual

8 Setting up repositories

Using SuperAgents as distributed repositories

Type the IP address or fully-qualified domain name and the port number of the HTTP and/or FTP
6
source where the agent pulls updates. Select Use these settings for all proxy types to make these the
default settings for all the proxy types.
7 Select Specify exceptions to designate systems that do not require access to the proxy. Use a
semicolon to separate the exceptions.
8 Select Use HTTP proxy authentication and/or Use FTP proxy authentication, then provide a user name and
credentials.
Click Save.
9

Configuring proxy settings for McAfee Labs Security Threats

Use this task to configure proxy settings for the McAfee Labs Security Threats.
For option definitions, click ? in the interface.
Task
Click Menu | Configuration | Server Settings.
1
Select Proxy Settings and click Edit.
2
The Edit Proxy Settings page appears.
Select Configure the proxy settings manually.
3
Next to Proxy server settings, select whether to use one proxy server for all communication, or different
4
proxy servers for HTTP and FTP proxy servers. Then type the IP address or fully-qualified domain
name and the Port number of the proxy server.
5 Next to Proxy authentication, configure the settings as appropriate, depending on whether you pull
updates from HTTP repositories, FTP repositories, or both.
Next to Exclusions, select Bypass Local Addresses, then specify any distributed repositories where the
6
server can connect to directly by typing the IP addresses or fully-qualified domain name of those
systems, separated by semicolons.
Click Save.
7
Using SuperAgents as distributed repositories
Use these tasks to create and configure repositories on systems that host SuperAgents. You cannot
create these SuperAgents until agents have been distributed to the target systems.
®
84 McAfee ePolicy Orchestrator
If you are using the default source and fallback sites, or if you configure
another HTTP source site and FTP fallback site (or vice versa), configure
both HTTP and FTP proxy authentication information here.
®
4.6.0 Software Product Guide