Renaming Subnets; Viewing Detected Subnets And Their Details; Rogue System Detection Command-Line Options - McAfee EPOCDE-AA-BA - ePolicy Orchestrator - PC Product Manual

21 Detecting Rogue Systems

Rogue System Detection command-line options

Task
1 Click Menu | Reporting | Queries & Reports, and query for any ignored subnets. For more information on
working with queries, see Reporting on System Status.
2 On the Unsaved Queries page, click Include.
In the Include dialog box, click OK.
3

Renaming subnets

Use this task to rename subnets.
This task can be performed
from:
Detected Subnets Details page
Detected Subnets page
For option definitions, click ? in the interface.
Task
Select the subnet you want to rename, then click Actions and select Detected Systems | Rename.
1
In the Rename dialog box, type the new name for the subnet, then click OK.
2

Viewing detected subnets and their details

Use this task to view detected subnets and their details. You can view detected subnets details from
any page that displays detected subnets.
For option definitions, click ? in the interface.
Task
1 Click Menu | Systems | Detected Systems.
2 In the Subnet Status monitor, click any category to view the list of detected subnets it contains,
such as Covered. The Detected Subnets page appears and displays the subnets in that category.
3 Click any detected subnet to view its details. The Detected Subnet Details page appears.
Rogue System Detection command-line options
You can run command-line options from the client system. You can start the sensor manually from the
command-line instead of starting it as a Windows service. You might want to do this if you are testing
functionality, or to check the sensor version. The following table lists the run-time command-line
options for the sensor.
Switch
--console
--help
--install
®
286 McAfee ePolicy Orchestrator
Getting there
Click Menu | Systems | Detected Systems, click any subnet category in
the Subnet Status monitor, then click any subnet.
Click Menu | Systems | Detected Systems, then click any subnet category
in the Subnet Status monitor.
Description
Forces the sensor to run as a normal command-line executable; otherwise it
must be run as an NT service.
Prints the Help screen and lists available command-line options.
Registers the sensor with the Windows Service Control Manager.
®
4.6.0 Software Product Guide