Working With Subnets; Adding Subnets - McAfee EPOCDE-AA-BA - ePolicy Orchestrator - PC Product Manual

21 Detecting Rogue Systems

Working with subnets

Task
1 From the Systems page or Systems Details page, select the systems where you want to remove
sensors, then click Actions | Rogue Sensor | Remove Rogue Sensor.
• In the Managed Systems for Subnet xxx.xx.xx.x page, select the systems where you want to
remove sensors.
• In the Systems Details page, you can remove the sensor from only the system you are viewing.
• In the Systems page, select the desired group in the System Tree, then select the systems
where you want to remove sensors.
2 In the Action pane, click OK.
Working with subnets
Use these tasks when working with subnets in Rogue System Detection, for example, adding,
including, and deleting subnets.
Tasks
• Adding subnets on page 284
Use this task to add subnets to Rogue System Detection.
• Deleting subnets on page 285
Use this task to delete subnets from Rogue System Detection.
• Ignoring subnets on page 285
Use this task to ignore subnets that you do not what to receive information about.
• Including subnets on page 285
Use this task to include subnets that have previously been ignored by Rogue System
Detection. This task can be performed by querying ignored subnets using the steps below,
or you can include subnets from the Ignored Subnets page. Click the Ignored link in the
Subnet Status monitor on the Detected Systems page to see the list of ignored subnets, where
you can optionally choose to include one or more ignored subnets.
• Renaming subnets on page 286
Use this task to rename subnets.
• Viewing detected subnets and their details on page 286
Use this task to view detected subnets and their details. You can view detected subnets
details from any page that displays detected subnets.

Adding subnets

Use this task to add subnets to Rogue System Detection.
For option definitions, click ? in the interface.
Task
1 Click Menu | Systems | Detected Systems, then in the Subnet Status monitor, click Add Subnet. The Add
Subnets page appears.
Choose the method you want to use to add subnets, specify the subnets you want to add, then
2
click Import.
®
284 McAfee ePolicy Orchestrator
®
4.6.0 Software Product Guide