Table of Contents
Advertisement
Level adjusting
(0 to −12 dB)
Output frequency range
20 Hz
HPF cut-off
LPF cut-off
frequency
frequency
Notes
• HPF (high pass filter): Cuts the lower frequencies and allows the higher
frequencies to pass.
• LPF (low pass filter): Cuts the higher frequencies and allows the lower
frequencies to pass.
• Slope: The level change (in dB) for a frequency change of one octave.
• The higher the slope value, the steeper the slope becomes.
• Adjust the slope to FLAT to bypass the HP or LP filters.
• Do not use a tweeter without the HPF on or set to a low frequency, as it
may cause damage to the speaker due to the low frequency content.
• You cannot adjust the crossover frequency higher than the HPF or lower
than the LPF.
• Adjustment should be made according to the recommended crossover
frequency of the connected speakers. Determine the recommended
crossover frequency of the speakers. Adjusting to a frequency range
outside that recommended may cause damage to the speakers.
For the recommended crossover frequencies of Alpine speakers, refer to
the respective Owner's Manual.
We are not responsible for damage or malfunction of speakers caused by
using the crossover outside the recommended value.
Slope FLAT
Slope adjusting
(Different from actual display)
Other Functions
Rotary encoder
/ENTER/OPTION
SOURCE
BAND
Displaying the Text
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name and the tag, etc., while playing
MP3/WMA/AAC files.
Press k VIEW.
The display will change every time the button is pressed.
Note
• When the TEXTSCROLL is set to MANUAL, press and hold
k VIEW for at least 2 seconds, the current text will be scrolled one
time (except Radio mode).
The display in Radio mode:
If there is PS (Program Service Name)
BAND/PS (Program Service Name) ARTIST/SONG
PTY (Program Type)/PS (Program Service Name)
RADIO TEXT BAND/CLOCK BAND/PS (Program Service
Name)
If there is no PS (Program Service Name)
BAND/FREQUENCY ARTIST/SONG PTY (Program Type)/
FREQUENCY RADIO TEXT BAND/CLOCK BAND/
FREQUENCY
The display in HD Radio mode:
When LISTENMODE is set to ANALOG For details, refer to
"Switching the listening mode" on page 28.
BAND+FREQUENCY STATION NAME+SONG NAME ARTIST
NAME+PTY BAND+CLOCK BAND+FREQUENCY
When LISTENMODE is set to other than ANALOG. For details,
refer to "Switching the listening mode" on page 28.
BAND+PRESET NO.+FREQUENCY STATION NAME+SONG NAME
ARTIST NAME+PTY BAND+CLOCK BAND+PRESET
NO.+FREQUENCY
The display in CD mode:
TRACK NO./ELAPSED TIME DISC TEXT
TRACK NO./CLOCK TRACK NO./ELAPSED TIME
The display in MP3/WMA/AAC mode:
*2
FILE NO./ELAPSED TIME
(FOLDER NO./)
FOLDER NAME/FILE NAME ARTIST NAME
*3
ALBUM NAME
/SONG NAME
*2
CLOCK (FOLDER NO./)
VIEW
*1
*1
/TRACK TEXT
*3
*3
/SONG NAME
*3
*2
(FOLDER NO./)
FILE NO./
FILE NO./ELAPSED TIME
23
-EN
Hide quick links:
Advertisement
Table of Contents
