Cd/Mp3/Wma/Aac; Playback; Repeat Play; Random Play) - Alpine CDE-147BT Manual

CD/MP3/WMA/AAC

Rotary encoder

/ENTER
 
SOURCE

Playback

The following table shows which discs can be played on which models.
CD CD-TEXT
CDE-HD148BT

CDE-147BT

1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Note
• When a disc is already inserted, press VSOURCE to switch to the
DISC mode.
2
While playing back MP3/WMA/AAC, press  or  to select
the desired folder.
3
Press  or  to select the desired track (file).
Pressing and holding  or  will fast backward/fast
forward track continuously.
4
To pause playback, press .
Pressing  again will resume playback.
5
To eject the disc, press .
Notes
• Do not remove a CD during its eject cycle. Do not load more than one
disc at a time. A malfunction may result from doing either.
• The "" indicator lights up when a disc is inserted.
• Three-inch (8 cm) CDs can not be used.
• Any file protected by DRM (Digital Rights Management) copy
protection, cannot be played back on this unit.
• The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
14
-EN

5

4
Preset buttons
(1 through 6)
MP3 WMA AAC
  
  
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.

Repeat Play

1
Press z 4.
The song is played back repeatedly.
*1
REPEAT ONE
REPEAT ONE
Only a track is repeatedly played back.
Only files in a folder are repeatedly played back. (MP3/WMA/
AAC mode only)
2
To cancel repeat play, select (REPEAT OFF) with the above
procedure.
Note
• a indicator lights up during repeat play mode.

M.I.X. (Random Play)

1
Press 5x.
The songs are played back in random sequence.
*1
MIX FOLDER
 Only files in a folder are played back in random sequence.
(MP3/WMA/AAC mode only)
The tracks/files are played back in random sequence.
2
To cancel M.I.X. play, select (MIX OFF) with the above
procedure.
Note
• s indicator lights up during random play mode.

Searching for CD Text

On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made using
the track numbers associated with each song.
1
Press ENTER during play.
2
Turn the Rotary encoder to select the desired track, and
then press ENTER.
This will play the selected track.
Notes
• If any one of the preset buttons (1 through 6) is pressed in the
search mode, a search can be made quickly by skipping to the specified
location. For details, refer to "Direct Search Function" on page 39.
• Press t in the search mode to cancel. Or, the search mode is canceled
if no operation is performed for 60 seconds.
• When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
*2
 REPEAT FOLDER  REPEAT OFF 
*2
 MIX ALL  MIX OFF  MIX FOLDER