Output Circuits
Channel Labels
Note that space is provided for labeling the function of each channel. Write the function that has been programmed
for each channel in the white boxes located to the right of the channel designator.
Style B Channel Connections
FIGURE 2-3:
2.2K EOL Resistor
Normally Open Contact Device
2.4
Output Circuits
Relays
The 411UD provides one Form-C relay rated for 2.0 amps @ 30 VDC (resistive). The relay is programmable for
activation on fire alarm, host panel trouble, fire supervisory, total communication failure, AC loss and DACT
trouble.
Programmable Relay
FIGURE 2-4:
One Form-C Relay
(nonsupervised)
Relay Label
Note that space is provided for labeling the function of the relay. Write the function that has been programmed for the
relay in the white box located below the relay designator.
Inputs are supervised,
power-limited
P/N 27070
Relay Label
411UD
Document #50759 Rev. E 12/09/2008 P/N 50759:E
Channel/Input Labels
17