Table of Contents
Advertisement
G
S
ETTING
TARTED
Tools needed:
• Phillips head screwdriver
• ¼"-20 wrench
• Drill with a #39 drill bit (drill for hard-mount installation only)
Slide off the cable cover.
Slide on the cable door and
remove the foam insert.
Mounting the MS7220: Peel off the base plate's tape backing and affix it to
the countertop or drill four #39 pilot holes and secure the base plate to the
countertop with the four #8 wood screws provided.
Slide off the horizontal stand.
Loosen the lock nut, push back
the metal base plate and then
slide the cable through the cable
opening.
Continued on next page.
3
Advertisement
Table of Contents
