Input Via 12-Button Keypad - Mercedes-Benz Comand Operator's Manual

Inserting a character
Move the cursor to the desired
position.
Enter the character as described at
"Entering characters" ( page 210).
Closing the selection menu
Press the Back soft key.
or
Press the Keypad soft key.
or
Use h, H, g, G or F to select
the ( field.
Press E.
In all cases, the system enters the data.

Input via 12-button keypad

You can enter upper-case and lower-case
letters including special characters and
numbers.
Entering characters
Press * or 1 - 0 to enter
characters.
Press a key once or several times in
quick succession.
i
E.g.: Key 5
Press 1 x = J
Press 2 x = K
Press 3 x = L
Press 4 x = 5
Entering data
After you pressed the key the first time,
the character is displayed at the
bottom of the screen.
You can see which characters you can
enter with that key.
Each continuing depression of the key
displays the next character.
If required, press key #.
This key shifts from lower to upper
case.
Wait until the displayed character
disappears.
The character is entered.
Service
211