Hitachi L200 Series Quick Reference Manual page 12

Error
Code
Thermistor
E35
E60 Communications error
Under-voltage (brownout)
---
with output shutoff
Error Trip Conditions
Use function code D081 to access the error trip conditions for the current
error as shown in the table below. Use the Up and Down arrow keys to
scroll through the trip condition parameters.
Step
1. Access D081
2. Press Function Key
3. Press Up/Dn key (if
error exists)
1
2
Name
d
081
If no error:
_ _ _
If error exists:
EXX
(error code)
Output frequency at trip point:
10.0
Motor current at trip point:
2.5
DC bus voltage at trip point:
284.0
Cumulative Run time house at trip
point:
15
Cumulation power-ON hours at
trip point:
18
Probable Cause(s)
• Thermistor input, [THM] and [L], is
over the temp. threshold
• The inverter's watchdog timer for the
communications network has timed out.
• Low input voltage caused the inverter
to turn OFF the motor output and try to
restart. If unsuccessful, a trip occurs.
Display
10