System Hardware - MSI MS-9246 1U User Manual

5. Place the heat sink on top of CPU1 and secure the screws on both sides.
Note: The heat sink has to be installed to prevent the CPU from overheating.
6. Remove the dummy heatsink on socket CPU2. Follow the same procedures to
install the second CPU.
7. Install the second heatsink.
Note: To ensure proper cooling, make sure the heatsinks & the fan duct are properly installed.
Note: To install DUAL CPUs on the board, you must use the same
types of CPUs running at the same FSB frequency.
8. Replace the fan duct.

System Hardware

2-7