2.2.6.
Removing the LCD Knob and the
Speaker
Preparation : perform the section 2.2.1. to 2.2.3. first.
1. Remove the latch spring from the top case.
2. Remove the hook of the LCD knob from stopper rib of the
top case.
3. Peel off the tape of the speaker box.
4. Peel off the tape on the speaker and speaker ring and then
remove the speaker.
Speaker Box
Speaker
Speaker
Ring
Latch
Spring
LCD Knob
Location of the Spring
2.2.7.
Removing the USB Board
Preparation : perform the section 2.2.1. to 2.2.3. first.
1. Peel off the tape for clamp the USB cable.
2. Remove the connector (CN23) on the main board.
3. Remove the USB board from the bottom case.
CN23
USB Cable
2.2.8.
Preparation : perform the section 2.2.1. to 2.2.3. first.
1. Remove the 1 screw (E), 1 screw (F) and 2 screws (H).
Screw (E):DXQT2+E10FNL(N10)
Screw (F):DXQT2+D4FNL(N9)
Screw (H):DFHE5035ZB(N2)
Screw (I):KIYE50000022(N500)
Screw(E)
2. Remove the 2 screws (N).
Screw (N):DXQT2+E6FNL(N13)
3. Remove the modem cable from the MDC modem.
4. Remove the side cover(L) from the bottom case.
DC Jack
Holder
Modem Cable
Tape
Main Board
2-Port USB Board
2-5
Removing the Main Board
Screw(F)
Side Cover(L)
Antenna Board(L)
LAN Cable
Screw(H)
Screw(I)
Screw(N)
Screw(N)
Tape