Putting of PET seat
The cable must not run aground on the damper.
Along the LCD module and put the LCD cable (Inverter part) with the PET tape.
Putting of rear damper
Processing of inverter cable
The cable must not run aground on the cushion.
Putting of gasket (LCD)
The line of the remainder
is put on hinge (R) side.
PET Tape
LCD Cable
(Inverter part)
Damper
Externals suiting of inverter case
0 1mm
Inverter Cable
Hinge (R)
Put the reflector part surely.
3-2
Conductive Cloth (LCD Cable)
LCD Cable
Conductive Cloth (LCD Cable)
LCD Cable
Rib application putting of LCD front case
0 1mm
Rear Damper
The cable must not come in succession.
Put on hinge (R) surely.
Gasket (LCD)
Externals suiting of reflector
0 1mm