Setting Sensor Dry - Maytag Neptume MD98 Use & Care Manual

S
S
ETTING ENSOR
If there are no words on the touchscreen, open the door, touch any pad (except off), or touch the screen to "wake" the controls.
"sensor dry" – automatically senses the moisture in the load and shuts the dryer off when the selected dryness level (very dry to
damp dry) is reached.This cycle is recommended for the majority of loads including delicates, wrinkle free and cotton/sturdy items
like towels, bedding and jeans.
Home
sensor dry
air fluff
time dry
(no heat)
more cycles favorites
Step 1
Select "sensor dry". The next screen will be the Review
Screen. If the selections are correct, press Start/Pause.
If changes need to be made, follow the next steps.
Press "Start/Pause" or
change your selection below.
options
Dryness
medium cycle chime
dryness level
very dry more dry
normal dry
normal dry
regular
damp dry
less dry
temperature
Step 2
Select dryness level. The dryness level ranges
from very dry to damp dry. Select the level
appropriate for the load. The "normal
dry" level will be used for most loads.
Press "Start/Pause" or
change your selection below.
options
Temperature
medium cycle chime
dryness level
normal dry
regular medium
extra low
delicate
regular
temperature
Step 3
Select appropriate temperature; "regular",
"medium", "delicate" or "extra low".
D
RY
Press "Start/Pause" or
change selection below.
options
dryness level cycle chime loud
normal dry remind chime OFF
regular
temperature
regular – for sturdy cottons or those labeled "Tumble Dry."
medium – for permanent press, synthetics, lightweight
cottons or items labeled "Tumble Dry Medium."
delicate – for heat sensitive items labeled "Tumble Dry
Low" or "Tumble Dry Warm."
extra low – Provides the lowest heated dry temperature
possible. "Extra Low Temperature" is lower than "Delicate."
very dry – used to completely dry sturdy or bulky items
including towels and jeans.
more dry – uses slightly less time to dry than very dry with
similar results. May find some blue jean seams slightly damp.
normal dry – used for drying the majority of loads.
less dry – still provides the benefit of the load being slightly
damp, but items will dry faster once they are laid flat or hung
to dry.
damp dry – designed to partially dry items. Used for items
that lay flat or hang to dry.
6
Cont.