Programming From A Pc With Spm - Lucent Technologies MERLIN LEGEND System Manager's Manual

MERLIN LEGEND Communications System Release 5.0
System Manager's Guide 555-650-118
6 Managing the System

Programming from a PC with SPM

Table 6–5.
To return to:
Previous menu
(or, in some
cases go to the
next item to
program)
Main menu
Normal call
handling
Programming from a PC with SPM
The System Programming and Maintenance (SPM) software package offers an
alternative method of programming using a PC. This method frees the system
programming console for other uses and also provides additional functions. Using
a PC with SPM enables you and qualified service personnel to program the
system from off-site locations.
SPM runs on a DOS-based PC as a standalone package, or on a UNIX System
platform with Integrated Solution II or Integrated Solution III (IS II/III, no longer
available).
NOTE:
Beginning with version 4.25, required for Release 4.1 of the system, SPM
runs under Windows 95 as a DOS application.
For more information about setting up and using SPM for programming on a PC
with DOS, see Chapter 2 of System Programming . For information about
accessing SPM from IS II/III, refer to the appropriate book:
Integrated Solution System Manager's Guide
Integrated Solution Installation and Maintenance Guide
Exiting System Programming
On the console press:
Exit
Menu
Home
On the PC press:
!
i
r
6
Issue 1
June 1997
Page 6-18