Ej Roller Unit Removal - Epson Stylus Color C70 Service Manual

Hide thumbs Also See for Stylus Color C70:
Table of Contents

Advertisement

EPSON Stylus COLOR C70/C80
4.
Turn the Front Paper Guide to the front and then remove it.
Front Paper Guide
Figure 4-52. Front Paper Guide Removal
Be careful not to break the section of the EJ Roller Holder
Assembly shown in the illustration below.
Figure 4-53. EJ Roller Holder
Disassembly and Assembly
C.B.S 3x6
EJ Roller Holder Assembly

4.2.8 EJ Roller Unit Removal

1.
Remove the Front Paper Guide. (Refer to Section 4.2.7.)
If not removing the Carriage Unit, move the Carriage Unit to the
middle position. (The following procedures can then be carried out
even without removing the Carriage Unit.)
2.
Remove the EJ Grounding Wire from the mounting hole, and then remove it from
the EJ Roller Unit.
Figure 4-54. EJ Grounding Wire Removal
Disassembly
Revision A
EJ Grounding Wire
122

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus color c80

Table of Contents