Epson Stylus Color C70 Service Manual page 176

EPSON Stylus COLOR C70/C80
No. Lubrication Type/Point
<Lubrication Point>
• EJ Unit Roller along the EJ Grounding
Spring.
Refer to Figure 6-12, "Lubrication point 5".
5
<Lubrication Type>
• G-26
<Lubrication Amount>
• 4mm
<Lubrication Point>
• The inner of EJ Roller Holder Assy along
the axes direction.
Refer to Figure 6-13, "Lubrication point 6""
6
<Lubrication Type>
• G-26
<Lubrication Amount>
• Τhe whole length
<Lubrication Point>
• The 3 shafts of PF Frame Assy on outside
end.
Refer to Figure 6-14, "Lubrication point 7".
7
<Lubrication Type>
• G-26
<Lubrication Amount>
• Whole shaft length
<Lubrication Point>
• To LD Rolled Shaft like (Figure 5).
Refer to Figure 6-15, "Lubrication point 8".
<Lubrication Type>
8
• G-26
<Lubrication Amount>
• Whole circle about 4mm width
Maintenance
Remarks
• Use a injector to apply it.
• Lubrication must be along EJ
Grounding Spring.
• Use a injector to apply it.
• Use a brush to apply it.
• Use a brush to apply it.
Overview
No. Lubrication Type/Point
<Lubrication Point>
• Two shaft and one hole of Left ASF Frame.
Refer to Figure 6-16, "Lubrication point 9".
<Lubrication Type>
9
• G-26
<Lubrication Amount>
• Whole circle but no pile
<Lubrication Point>
• The gear face of Spur Gear 12.
Refer to Figure 6-17, "Lubrication point 10".
<Lubrication Type>
10
• G-26
<Lubrication Amount>
• Whole circle on two end gear face.
<Lubrication Point>
• Two shaft and one hole of Right ASF Frame.
Refer to Figure 6-18, "Lubrication point 11".
<Lubrication Type>
11
• G-26
<Lubrication Amount>
• Right round on two shaft and one hole of
Right ASF Flame without pile.
<Lubrication Point>
• On the shaft of Left ASF Flame unit.
Refer to Figure 6-19, "Lubrication point 12".
<Lubrication Type>
12
• G-26
<Lubrication Amount>
• About 2 or 3 particle
Revision A
Remarks
• Use a brush to apply it.
• Use a brush to apply it.
• Use a brush to apply it.
• Use a brush to apply it.
176