Working Method - DURKOPP ADLER 745-34 Speedpocket Operating Instructions Manual

2.14 Working method

Working method
A
On the following pages the working method is described.
The description is divided into the following items:
Positioning points
This item indicates which positioning points are used for the various
workpieces (e.g. left and right pieces).
Aligning the positioning aids
This section describes the adjustment and alignment of the positioning
aids (e.g. positioning marks, marking lamps, stop guides etc.).
Positioning and starting the sewing cycle
Under this item the individual positioning steps are listed with
common positioning examples.
Caution: Danger of injury!
Do not reach under the downholder, the feeding clamp and the folder
during the positioning process.
Remarks
Piped pockets,
manual positioning of piping strips,
flaps and other additional parts
1
29