–
Activating the Softstart.
Press the key.
The LED is lit when the function is selected.
–
Preselecting end securing at the seam beginning.
Press the key.
LED on:
End securing through stitch condensation
LED off:
End securing through seam tacking
–
Preselecting end securing on the seam end.
Press the key.
LED on:
End securing through stitch condensation
LED off:
End securing through seam tacking
–
Activating end securing at the seam beginning or at the seam
end.
Press the key.
Depending on which LEDs are lit, the end securing is active.
End securing through stitch condensation or bar tacking:
Seam beginning with
Seam beginning without
Seam beginning with
Seam beginning without
–
Activating the smoother.
Press the key.
The LED is lit when the function is selected.
–
Activating the blower from above / from the right.
Press the key.
Blower from above
Blower from the right
Blower off
The controls are completely set.
Seam end with
Seam end with
Seam end without
Seam end without
21