Table 1-16. Language Selections - Epson Stylus 820 Service Manual

Stylus Color IIs / Stylus 820
Table 1-15. Default Setting Items (Continued)
Item
Auto line feed
Loading position
Thick paper
Note: The underlined value is the factory setting.
1.4.3.2 Changing the Default Settings
To change the printer's default settings:
Hold down the Pause button and turn on the printer. The printer outputs a sheet that shows the
1.
firmware version and describes how to select the language used to print messages. You can select a
language by pressing the Alt button, and set it by pressing the Pause button. (See Table 1-16.)
English
Francias
Deutsch
Italiano
Español
Press the Pause button. The printer prints the current settings using the selected language. It also
2.
prints a table showing how to change printer settings.
3. Press the Alt button to advance through the setting menus. The current printer settings are indicated
by the Error , Condensed , and Economy LEDs. Each time you press the Pause button, you advance
to the next setting, and the three font LEDs change according to the selection.
4. After you set all values, turn the printer off to save the new settings.
Rev. A
Off
On
8.5 mm
3 mm
Envelopes
Index card (portrait)
Table 1-16. Language Selection
Error
LED
On
Off
On
Off
On
Product Description
Contents
Condensed
LED
Off
On
On
Off
Off
Economy
LED
Off
Off
Off
On
On
1-15