Duerkopp Adler 550-867 Fitting Instructions Manual page 22

3.6.2 Setting the inclination of the light barrier
Fig. 20
Ausgabe/ Edition:
06.2011
Anbauanleitung Kantenerkennung
Teilesatz 0867 590944
Fitting Instructions Edge Recognition
Kit 0867 590944
2
The coverage of the light barrier 1 should begin at the left edge of the
reflective tape on the slider 2.
– Put a piece of paper under the lifted sewing foot.
– Slowly move the paper to the right and observe the screen in order
to see when the values 1 begin to change.
– Loosen screws 5.
– Incline the light barrier 1 in a way that the measuring range begins
on the edge 2 of the slide.
– Tighten screws 5.
Änderungsindex
Rev. index:
0.00
1
Fig. 21
Printed in Germany
Teile-Nr. / Part-No.:
0791 550702
5
Blatt: von
Sheet: 22 from 24