Duerkopp Adler 550-867 Fitting Instructions Manual page 16

3.2.2 Connecting the power supply
2
Fig. 8
Ausgabe/ Edition:
06.2011
Anbauanleitung Kantenerkennung
Teilesatz 0867 590944
Fitting Instructions Edge Recognition
Kit 0867 590944
1
– Pull the cable 1 for the power supply of the inductive sensor 1
downwards out of the cable duct 2.
– Fix the cable to the signal line 5 using a cable tie 3.
– Connect the cable connector to the cable of the edge-guide 4.
Änderungsindex
Rev. index:
0.00
4
Fig. 9
Printed in Germany
Teile-Nr. / Part-No.:
0791 550702
5
3
Blatt: von
Sheet: 16 from 24