Duerkopp Adler 550-867 Fitting Instructions Manual page 18

3.4 Activating the edge regulator in the software
Ausgabe/ Edition:
06.2011
Anbauanleitung Kantenerkennung
Teilesatz 0867 590944
Fitting Instructions Edge Recognition
Kit 0867 590944
– Switch on the sewing station.
– Log in to the system.
– Click "Check".
– Click "Setup".
The following screen will appear:
Fig. 13
Fig. 14
– Select the option "Edge measuring" and activate it.
– Confirm by clicking "OK" and go back to the main menu
Änderungsindex
Rev. index:
0.00
1
Printed in Germany
Teile-Nr. / Part-No.:
0791 550702
Blatt: von
Sheet: 18 from 24