Assembly Of The Sewing Unit - Duerkopp Adler 910 Installation Instructions Manual

4.2 Assembly of the sewing unit

4 3 2 1
The small parts for setting up the sewing unit are included in the
accessories.
–
Place the sewing unit 1 on the oil pan 4.
–
Fasten the sewing unit on the left and on the right with the fixtures
5 and 8.
For this purpose screw the fixtures 5 and 8 tight with the screws 9,
the sheets 11 and the counternuts 10.
–
Insert the machine head support 6 in the drill-hole of the table top.
–
Tilt the sewing unit sideways.
–
Run the connecting cables 2 under the table top through the
opening 3.
–
Tilt the sewing unit back.
9
8
10
8 7
9
10
11
6 5
5
13
2