Wiring; Mounting The Thread Reel Holder - Duerkopp Adler 910 Installation Instructions Manual

5.3 Wiring

6.

Mounting the thread reel holder

2
In order to make it possible to tilt the machine head back the cables
leading from the head through the opening in the table top either to the
multiple pin strip (15-fold) at the control box or to the cable duct must
be long enough. For this purpose the cables must be laid to form a
great bend 2 with the help of some cable clips.
–
Insert the thread reel holder in the drill-hole of the table top and
screw it tight with nuts and washers.
Mount and align the thread reel arms and the thread guides.
The thread reel arms and the thread guides have to be positioned
vertically one upon the other.
2
19