2.5.6
Needle penetration in feeding direction
24
2
Caution: Risk of injury !
Turn the main switch off !
Check and set the needle penetration only with the sewing machine
switched off.
Standard checking
The needle 1 should penetrate the centre of the feed dog's 2 stitch
hole when the stitch length is set to "0".
–
Set the stitch length to "0".
–
Insert a new needle.
–
Turn the needle bar with the handwheel until it descends.
–
Check the position of the needle in the stich hole.
Correction
–
Effectuate the settings of chapter 2.5.1 (needle bar) once again.
1