DURKOPP ADLER 867 Instructions Manual page 8
Fitting seam center guidevfor class 867
Hide thumbs
Also See for 867:
- Durkopp adler (192 pages) ,
- Service instructions manual (164 pages) ,
- Parts list (153 pages)
Advertisement
Available languages
Available languages
Klasse 867 Anbauanleitung Nahtmittenführungen
N800 005655 (mechanisch) N800 005650 (pneumatisch)
Class 867 Instructions for fitting seam center guide
N800 005655 (mechanical) N800 005650 (pneumatically)
4.
Working method and parameter setting of the seam center guide
When the machine is switched off, the seam center guide is in position "down" (= solenoid valve
electrically off). As soon as the machine is switched on, the seam center guide is always in position
"up" (= solenoid valve electrically on).
With key 1 (see operating instructions) on the 6-key pad at the machine the seam center guide can
be switched on or off at any time.
Key 1 (white) of the 6-key pad has to be replaced by the
key cap 2 with the symbol "seam center guide".
Required parameter settings:
Sewing drive/control
DC 1550/DA 321G
F-275 on value "5"
Possible parameter settings for the seam center guide:
Parameter
DA321G
DA82GA
F-278
F-186
F-278
F-186
F-260
F-260
F-261
F-261
F-261
F-261
F-261
F-262
F-262
F-262
If the seam center guide is off (position "up"), the status is maintained, irrespective of how the
parameters F-261 and F-262 are set and which function is active.
Ausgabe/Edition:
05. 2006
DC 1600/DA 82GA
F-149 on value "3"
Value
Function seam center guide...
0
... only on and off by key 1
>0
... automatically on after stitch counting
0-OFF ... lowering after sewing foot lifting with stitch counting off.
1-ON
... lowering after sewing foot lifting after the set number of stitches
DA82GA: PAR F-186
DA321G: PAR F-278
0
... when tacking and sewing foot lifting always on, if it is switched on
1
... only off during tacking and sewing foot lifting, if it has been
switched on before
2
... only off during sewing foot lifting, if it has been switched on before
3
... only off during tacking, if it has been switched on before
0
... during stroke adjustment (HP) by knee switch always on, if it
is switched on
1
... off during stroke adjustment (HP) by knee switch, if it
has been switched on before.
Printed in Federal Republic of Germany
Teile-Nr./ Part-No.:
0791 867701
1
2
Blatt:
von
Sheet: 8
from 8
Advertisement
