General Information - DURKOPP ADLER 867 Instructions Manual

Klasse 867 Anbauanleitung Nahtmittenführungen
N800 005655 (mechanisch) N800 005650 (pneumatisch)
Class 867 Instructions for fitting seam center guide
N800 005655 (mechanical) N800 005650 (pneumatically)
1.

General information

The seam center guide serves as guiding aid when topstitching.
It is used for guiding the center of two seams with equal distance so that the distance to the left and
to the right needle is equal.
Can be fitted to all twin needle special sewing machines of class 867 with sewing equipment E24.
2. Mechanical seam center guide
2.1 Contents of the set of parts
The complete mounting kit for fitting the mechanical seam center guide with the order no.
N800 005655 consists of the following components:
1 x 0667 245004
2 x 9202 002077
2 x 9202 002877
2 x 9330 000087
1 x N800 075013
1 x N800 080003
2.2 Fitting the seam center guide
– Screw the pre-assembled seam center guide 1 on the
sewing head from behind with the screws 2.
– Align the seam center guide 1 horizontally to the table top and take care,
that the distance to the left and the right needle is equal.
The distance between guide 3 and the throat plate should
amount to approx. 1 mm.
2
Ausgabe/Edition:
05. 2006
Stop guide V
Cylinder head screw (M4x10)
Cylinder head screw (M6x10)
Disc (A4,3)
Ruler, K
Holder
3
Printed in Federal Republic of Germany
Teile-Nr./ Part-No.:
1
Sheet: 5
0791 867701
Blatt: von
from 8