Play Different Sounds In The Left And Right Hands; Change The Sound; Save A Sound That You Create; Use The Trinity As A Midi Data Filer - Korg Trinity series Basic Manual

9 Press the tab 2 button (Vel Zone), and set the Top Vel to 127, the Bottom Vel to 1, and the Top
Slope and Bottom Slope to 0.
0 As desired, make other settings for the timbre.
A Repeat steps
play together.
B Play the keyboard, and the programs that you specified here will sound simultaneously.

Play different sounds in the left and right hands

A combination allows you to simultaneously play two or more programs in a variety of ways.
Here's how to make settings for a "split."
The procedure is the same for the previous section on "Simultaneously play two or more pro-
grams," but in step
to divide the different sounds (the upper limit and lower limit for which each program will
sound). Set the Top Slope and Bottom Slope to 0.

Change the sound

In Program Edit mode you can edit the various parameters to change the sound or create your
own sounds. For details refer to the Parameter Guide.
You can also make simple edits in Program Play mode, without having to enter Program Edit
mode. In Program Play mode, the eight sliders displayed in the lower half of the screen are
assigned to major parameters used to adjust the sound. By adjusting these you can change the
sound in various ways, and this is an easy way to adjust the tone. When you finish editing the
sound, use the Write operation to save the data into memory.

Save a sound that you create

An edited program (sound) will be lost if you select a different program or turn the power off. If
you wish to keep an edited program or combination, you must write it into internal memory.
There are two ways to write data.
One is to select Update Program (Combination) from the page menu of Program Play mode or
Combination Play mode, so that the edited data will be written into the currently selected pro-
gram number or combination number.
The other is to select Write Program (Combination) from the page menu of Program Edit mode or
Combination Edit mode, and write the data into the specified program number or combination
number.
You can also press the [REC/WRITE] key to write a program or combination. This will write the
data into the currently selected program number or combination number. Before you can write
data, you must un-check the Global mode P2 setting Protect Program or Protect Combination.
Use the TRINITY as a MIDI data filer
MIDI exclusive data can be received from an external device and saved on a floppy disk (the Data
Filter function). This is done by selecting the Disk mode P1 menu page item Save Exclusive.
4 – 0 to make settings for other timbres, for as many programs as you want to
, set the Top Key and Bottom Key to the keyboard location where you want
8
11. When you want to...
73