Step 2; Listening To The Demo Songs - Korg Trinity series Basic Manual

STEP 2

1. Listening to the demo songs

On the TRINITY V3, TRINITY V3 pro, or TRINITY V3 proX, insert the included "TFD-00P-V3" floppy
1
disk into the disk drive. On the TRINITY, insert the included "TFD-00P" into the disk drive.
For details on how to insert a disk, refer to "8. Disk mode" on page 53 of this manual.
Press the [DISK] key.
2
You will enter Disk mode.
Press the tab 1 button (Load).
3
The Load tab page will appear, showing the file information.
PostScript error (undefi
On the TRINITY V3, TRINITY V3 pro, or TRINITY V3 proX, select "V3_PLOAD.SNG." On the TRINITY,
4
select "PRELOAD1.SNG."
The information will be highlighted.
These .SNG files contain data for demo playback.
Press the page menu button.
5
The menu commands will be displayed.
Press the page menu command Load Selected.
6
A dialog box will appear.
Press the check box so that it is checked.
7
If this is checked, loading a .SNG file will simultaneously cause the .PCG file (program, combina-
tion, and global data) required to play the songs to be loaded as well.
When you load a .PCG or .SNG file, the program, combination, global, and song data in
internal memory will be overwritten.
If you want to preserve the program, combination, global data, or song data, save it to a
floppy disk ( page 56 in this manual).
Press the OK button.
8
Press the [START/STOP] key.
9
The TRINITY will automatically enter Sequencer mode, and the demo song will begin playing
back.
To stop demo playback during the song, press the [START/STOP] key once again.
If you wish to load a different .SNG file that is on the same floppy disk, select the desired .SNG
file in the Load screen of step
The .PCG file necessary for loading the selected .SNG file has already been loaded, so in step
press the OK button without checking the box. Then press the [START/STOP] key.
When the power is turned off, all song data including the demo songs will be lost. Be sure to
save important song data to a floppy disk before you turn the power off ( page 56 in this
manual).
4
, and press the page menu command Load Selected.
6
11