Step 3; Program Play Mode; Selecting A Program; Editing With The Performance Editor - Korg Trinity series Basic Manual

1. Program Play mode

Press the front panel [PROG] key to enter this mode. Here you can select programs, and use the
performance editor to adjust the sound. If you wish to save the changes you make with the perfor-
mance editor, turn off the memory protect setting in Global mode ( page 51 in this manual), and
use the program write operation ( page 23 in this manual).

Selecting a program

Programs can be selected in the following three ways. For each procedure, refer to the appropriate
page. The programs that are available will depend on the model of your TRINITY, and on whether
the Playback Sampler/flash ROM option and/or the MOSS-TRI option is installed ( page 9 in
this manual).
• selecting a program using the front panel keys ( page 13 in this manual)
• Selecting a program using a connected switch ( page 14 in this manual)
• Selecting a program using incoming MIDI Program Change messages ( page 62 in this man-
ual)
For the factory preset program names, refer to the separate Voice Name List booklet.

Editing with the performance editor

The performance editor allows you to adjust the main parameters of Program Edit mode. For
details refer to "7. Easy editing in Program Play mode" on page 21 of this manual, and "1–1: Pro-
gram Play" on page 1 of the separate Parameter Guide.

STEP 3

27