Changing The Printhead - Epson LQ-1070 Service Manual

3.2.1 Changing the Printhead

2. Remove the COVER ASSY., EJECT.
Figure 3-2. Removing the FRAME ASSY., SHEET GUIDE and the COVER ASSY., EJECT
3. Release the two levers that hold the printhead to the carriage. Lift out the printhead.
4. Remove the two FFCS (CABLE, HEAD, FRONT(,REAR)) from the printhead.
Figure 3-3. Removing the Printhead
3-5
HEET GUIDE
"(This illustration shows the LQ-570,
an 80-column printer. The difference
b e t w e e n t h e LQ-570 and the LQ-
1070 is only in carriage width.)
REV.-B