Lever Positions; Lever, G, Adjust - Epson LQ-1070 Service Manual

REV.-B
Short-tear-off
To access the short-tear-off function, press the TEAR-OFF button. The release lever must be in the tractor
position. The paper advances to the tear-off position whether the printer is in PAUSE or RUNNING
condition. At this time, the TEAR-OFF LED lights to indicate that you can use the LOAD/EJECT and LINE
FEED/FORM FEED buttons, in conjunction with the ALT button, for backward and forward micro feed
adjustment. Using micro feed, adjust the paper to meet the tear-off edge. Once the tear-off position
is set, this setting remains valid even after the printer is turned off or initialized. If subsequent data is
sent to the printer and the printer is in the RUNNING condition, the paper returns to its original position
automatically and printing starts. If the TEAR-OFF button is pressed again while the paper is advanced
to the tear-off position, paper returns to its original position whether the printer is in PAUSE or RUNNING
condition.
I 1.6.10 LEVER, G, ADJUST Operation
The LEVER ,G, ADJUST must be set to the proper position for the paper thickness. If this lever has been
set to the 4th step or higher, printing speed is reduced and the head energy is increased.
Table 1-16. Lever Positions
1 position (3rd step)
Figure 1-10. Lever Positions
1-24
A ,DJUST