Default Values; Sheet Loading And Sheet Ejection - Epson LQ-1070 Service Manual

REV.-A
(a) Initializes printer mechanism.
(b) Clears input data buffer.
(c) Clears downloaded character set.
(d) Clears print buffer.
(e) Returns printer settings to their default values.
(2) Software initialization
Input of the ESC @ command also initializes the printer. Printer initialization by ESC @ code does not
perform functions (a), (b), and (c) above. The settings changed by the last SelecType operation are
maintained.
(3) Panel initialization
This printer can be initialized by pressing the PAUSE button in combination with the ALT button. When
the printer is initialized from the front panel, functions (a) and (c) above are not performed. The settings
changed by the last SelecType operation are maintained.

1.6.7 Default Values

When the printer is initialized, the following default values are set:
Page position
Left and right margins
Line spacing
Vertical tabs
Horizontal tabs
Family number of type style
Download characters
Character spacing
Printing effects
Condensed printing
Printer condition

1.6.8 Sheet Loading and Sheet Ejection

The release lever can disengage the pull-tractor unit drive mechanism, giving this printer improved
paper-handling for functions that utilize the release lever. These functions are described below:
Automatic cut-sheet loading without the cut-sheet feeder
Move the release lever to the friction-feed position, and place the sheet along the paper guide (top or
front). A few seconds later, the sheet is automatically loaded to the top-of-form position and the printer
enters the RUNNING condition.
The current paper position becomes the top-of-form position
Released
1/6 inch
Cleared
Every 8 characters (relative)
Last font selected from the panel
Kept - software initialization
Cleared – hardware initialization
10 cpi
Cleared, except condensed printing
Last setting selected from the panel
RUN
1-22